SensThys Hardware and Software Video User Guides
This page is divided into two sets of hardware video user guides. One set of two videos for the SensArray and one set of two videos of the SensX Extreme. There are two further videos focused on the software (RFID Console setup and usage) that are common to both sets of readers since they are software compatible.
SensArray User Guide (Video 1 and 2 for SensArray)
A Four Part Video Introduction to the SensArray Hardware and Software. View these two videos and then jump down to view the two RFID Console Videos.
SensArray User Guide Video 1: This video reviews the hardware and connectors on the latest SensArray readers. Start with this video for basic hardware familiarization. Wow, the ethernet ports carry power to other readers?!
SensArray User Guide Video 2: How do I connect up my hardware, which cables go where, how do I attach an external antenna? All answered here.
SensX Extreme User Guide (Video 1 and 2 for the SensX Extreme)
Start here for your SensX Extreme User Guide videos. Watch these two videos as an introduction to the hardware and then the Two RFID Console videos below (common to both readers).
SensX Extreme User Guide Video 1: This video reviews the hardware and connectors on the latest SensX Extreme reader. Start with this video for basic hardware familiarization. Yep - this reader doesn't need a NEMA box...it's happy working in the Outback or Siberia.
SensX Extreme User Guide Video 2: OK, how do I connect RFID antenna, GPS and power up my reader for the first time?
RFID Console (ProSens) User Guide - Video 3 & 4 For Both SensArray And SensX Extreme
SensArray/SensX Extreme User Guide Video 3: Where do I find the software to run my reader? How do I install it? What happens after I install?
SensArray/SensX Extreme User Guide Video 4: Now you have installed the RFID console, this video examines the features and functionality it offers and shows you how to access these. After this, you're a "pro" and can go off without training wheels!
SensX Extreme Supplementary Videos
The SensX Extreme is a very powerful reader, packed with multiple sensors. So how do I access these? In this video we explore how to do this within the RFID Console by highlighting the differences when the RFID Console is used with this reader.
The SensX Extreme has a quad-core processor with Linux and a full browser version of the RFID Console built into it. We take a tour of this browser which largely duplicates that of the RFID Console but also addresses the additional sensors. Ultimately you can chose to either use the RFID Console or the internal web-browser. the choice is yours.
PhySens Video User Guide (UPDATED)
PhySens runs on SensThys readers and is used in a variety of applications such as composite curing, automotive leak detection and many other. It provides real time visualization and capture of the environmental conditions the paper-thin sensors are placed in (e.g. temperature, moisture, cure status, strain etc).